Universal Oil Sandwich Plate Kit (TVC50)

3/4UNF or M20 x 1.5mm versions available

  1. View TVC50 showing NPT ports
  2. View TVC50 with TVC300 and hoses[1]
  3. View TVC50 fitted up with#3D5FDD
  4. View TVC50 1psd
  5. View TVC50 2
  6. View TVC50 3
  7. View TVC50 fitted up
  8. View TVC50 pack contents
  9. View TVC50 fitted up from underside
  10. View TVC50 from back showing logo

This sandwich plate kit is a 'universal' design to allow usage on most spin on oil filter housings. Available with 3/4UNF or M20 x 1.5mm threaded fitting bolts and other threads upon application.

In addition it has two 1/8 NPT ports that allow for the fitting of temperature or pressure sensors and

About TVC50

£45.40 inc

installing an oil take off for turbo or superchargers etc. It should be noted that any oil take off must be regulated or restricted either in line or at the application.

Use as Oil Take Off

Can be converted into a take off until when used with TVC150 Take Off Cover (3/4UNF and M20 x 1.5mm versions available).

This will enable full remote oil cooling and filtration.

Specification

  1. View TVC150 in position on TVC50 with straight hose end
  2. View TVC150 on TVC50 from#3D6023
  3. View TVC150 showing O rin#3D601F
  4. View TVC50 with TVC150
  5. View TVC50 with TVC150 from end on

Some key details

Machined from 6061 billet aluminium and silver anodised34.00mm height. 80mm width.Two versions available - 3/4UNF or M20 x 1.5mm fitting boltsMain ports are 1/2BSP and the kit comes with adaptors to -10 JIC/AN. Other adaptors are available.

To find out why we use -10 JIC/AN as standard please check our 'Why -10 JIC/AN' page.

Application

This sandwich plate kit is universal in its application. It is installed between the spin on oil filter and filter housing. Popular thread choices are 3/4UNF or M20 x 1.5mm thread type (other available).

This is what you will get....

It is a complete kit, ready to install and is supplied in display packaging that includes

1 x MIH Performance Universal Oil Sandwich Plate

1 x 3/4UNF or M20 x 1.5mm Fixing bolt - choose when ordering

2 x 1/2BSP to -10 JIC/AN adaptors with 'O' ring seals

2 x 1/8 NPT plugs

1 x Large 'O' ring

1 x Allen Wrench

1 x Information Leaflet.

 

You are viewing the text version of this site.

To view the full version please install the Adobe Flash Player and ensure your web browser has JavaScript enabled.

Need help? check the requirements page.

Get Flash Player