About TVC100

A remote filter housing that allows the user maximum flexibility with hose connections due to the four ports - one inlet and one outlet on each side - yet retains excellent appearance and technical characteristics. Supplied with matching blanking plugs and hose adaptors to give a well rounded and professional appearance.

The oil inlet and return hoses can be connected from either side, the unused port will be blanked off with the bespoke billet aluminium plug. The important consideration is the oil flow direction through the filter. Oil flows into the filter housing via either of the back two ports and exits via either of the front two ports.

Will mount on any flat surface and comes complete with fixing bolts and washers.

Can be used with a regular 3/4UNF oil filter unit or our Billet Inspection Oil Filter (TVC300).

This unit does not have a facility to fit a temperature or pressure sensor. These devices can be fitted into any of our oil sandwich plates or take off plates that all have two spare 1/8NPT ports. However it is possible to replace one of the billet blanking plugs with a reducer to allow a sensor to be installed if required.